We use three electric Toyokoki press brakes, 12”, 6’ and 10’ with forming pressure up to 60 tons paired with our MetaCAM and SolidEdge software for precision forming within ± 0.00039 inches (That's 1 micron!)
Our 100% electric Toyokoki APB-5620Wu press brake was purchased to increase the shops productivity and accuracy .The press brake supplements our 10’ - 100 ton Accurpress press brake.
Toyokoki company pioneered the development of the world's first 100% electric press brake. With over 30 years experience designing brakes, Toyokoki recognized the need for a new machine to meet the growing demand for shorter lot runs with greater accuracy and repeatability.
Since the repeatability of dead bottom center was dependent on oil temperature and viscosity, they developed a new machine called the APB Series which for the first time controlled the ram movement directly with heavy-duty ball screws.
An AC servo motor is connected to the ball screw by a non-stretchable gear belt. The speed of the ram is dictated by the motor RPM while ram position is set by the rotary encoder on the motor. Vertical position is directly proportional to the screw rotation. The end result is the the ram positions to within +/- 0.00039 inches.
Based on many years of expertise in the bending field, Toyokoki developed the world's first totally electric high-precision Press Brake equipped with eco-friendly AC servo motor and has already delivered a lot to customers. With the use of a direct drive mechanism that is based on large-diameter, high-precision ball screw driven by the AC servo motor, this machine performs extremely accurate ram control with ram repeatability of ±1?1000 mm in a simple mechanical structure.
Providing easy-to-operate ultrahigh-precision bending machines, Toyokoki helps you respond to such growing trends as small-lot large-variety production, short delivery schedules, increased product complexity and increased accuracy requirements.
Responding to various user needs with a wide range of product lines. Driven by fast-Response, Direct-Drive AC Servomotor and Ball Screw. While precisely following NC commands ranging from high speeds to ultra-low speeds, the servomotor ensures micron-level stopping accuracy.
The perfect combination of the servomotor and the ultraprecision ball screw enables "ultrahigh accuracy" to be maintained for man-hour continuous operations.
Flexible and user-Friendly NC and High-precision mechanism Ensures Bending. Various functions make difficult precision bending easy in order to perform ultrahigh precision bending quickly and accurately.